Address: Room29, Lot C12, 1st floor, podium level,
Financial Park, 87000, Wilayah Persekutuan Labuan, Malaysia
Whats app: 0060172424951

products

ABOUT US

Chemical Mine World Ltd was founded in 2003 in Malaysia. The special environment of Malaysia provided Chemical Mine World Ltd with the access to networks of production and consumers of chemical products. Through effective mergers and partnerships with known producers in the Middle East, now Chemical Mine World Ltd produces and supplies a range of custom-processed materials and chemicals essential to drilling and asphalt operations.

GILSONITE / ASPHALTUM

HOW ORDER GILSONITE

GILSONITE PACKAGE

Gilsonite IN Oil&Gas

Gilsonite in Oil
 
 
Gilsonite is used in drilling mud fluids and oil well cementing.                                                     

Gilsonite, "Natural asphalt, Natural Bitumen" in a range of softening points and particle sizes, is a standard ingredient in oil-based drilling muds used in shales and other difficult geological formations. The addition of specially-treated Gilsonite to water-based drilling fluids helps minimize hole washout by stabilizing troublesome shales, and seals off highly permeable sands while reducing torque and drag.

The addition of Gilsonite to oil well cements reduces slurry weight without loss of compressive strength and acts as an effective bridging and plugging agent to seal fractures in weak formations while cementing. also Gilsonite,"Natural asphalt, Natural Bitumen" use in Mud drilling according to FLC " Filtrate Loss Control " or " Fluid Loss Control " in oil base mud.

FLC " FLUID LOSS CONTROL "
 HT
Grade CH-109GP API

Principal Applications
HT HP Filtrate Loss Control
FLC Fluid Loss Control
Shale Control

                                     Typical Properties
Softening Point (ASTM E28-92) 185-220°C
356-428°F
Ash (ASTM D271-70M)  <=10.0%
Moisture (AGC Method) <=1.5%
Penetration (25°C, 100 gm, 5 sec.) 0-2
Specific Gravity 1.04-1.06
Color in Mass Black
Flash Point (COC) 320ºC; 600ºF
Sulfur 0.30%

FLC " FLUID LOSS CONTROL "
HV HM HT
Grade CH-109GR API

Principal Applications
Ultra HT-HP Filtrate Loss Control
FLC Fluid Loss Control
Shale Control
HIGH TEMPERATURE , HIGHT MELTING POINT , LOW VISCOSITY

                                         Typical Properties
Softening Point (ASTM E28-92) 250-270°C
482-518°F
Ash (ASTM D271-70M)  <=10.0%
Moisture (AGC Method) <=1.5%
Penetration (25°C, 100 gm, 5 sec.) 0-2
Specific Gravity 1.04-1.06
Color in Mass Black
Flash Point (COC) 320ºC; 600ºF
Sulfur 0.30%

FLC " FLUID LOSS CONTROL "
LV HM HT
Grade CH-109GW API

Principal Applications
Ultra HT-HP Filtrate Loss Control
FLC Fluid Loss Control
Shale Control
HIGH TEMPERATURE , HIGHT MELTING POINT , LOW VISCOSITY

                                        Typical Properties
Softening Point (ASTM E28-92) 220-250°C
430-482°F
Ash (ASTM D271-70M)  <=10.0%
Moisture (AGC Method) <=1.5%
Penetration (25°C, 100 gm, 5 sec.) 0-2
Specific Gravity 1.04-1.06
Color in Mass Black
Flash Point (COC) 320ºC; 600ºF

 

                  Typical Particle Sizing (ASTM E11-70)
% Retained (Cumulative)
  Pulverized
+ 10 mesh --
+ 35 mesh 0
+ 65 mesh <=1
+ 100 mesh <=5
+ 200 mesh <=20

Quality:

FLC and Gilsonites are according to API and OCMA grades of 200Mesh that they are changable according to customer requirements
FLC Fluid loss Control Filtrate loss Control
Gilsonite HT Grade is soluble in aromatic solvents (Benzene, Toluene, Xylene) and in most chlorinated solvents.

Packaging Gilsonite:
Gilsonite HT Grade is available in 50 lb. and 25 kilo net multi-ply paper bags, which may be palletized and stretch wrapped. It is also available in a variety of bulk bag sizes.

Health & Safety:
Gilsonite, "Natural asphalt, Natural Bitumen" is a naturally occurring hydrocarbon. There is no known history of dermatitis, lung disease or other health problems associated with handling of Gilsonite resin as supplied. Dusts are subject to combustion. Normal precautions used with flammable materials apply.

Gilsonite Application For Oil&Gas PDF